Curved Golf Enclosure
Price range: $4,894.95 through $6,629.95
The curved enclosure wraps the impact screen around the hitting area in a continuous arc instead of a flat rectangle. The result is less visual edge on either side of the screen, better peripheral fill, and a more immersive image when projecting. If you’ve used a flat enclosure and felt the side walls cutting off the image, this addresses that directly.
⚠️ A 10-foot ceiling is recommended for comfortable full swings. Actual clearance needs may vary by enclosure size, golfer height, swing, and club.
Curved Golf Enclosure
Curved Golf Enclosure Kit from Carl’s Place is built for golfers who want a wider, more immersive indoor golf simulator setup than a standard flat enclosure. The curved design helps create a more professional simulator bay for home golf rooms, training studios, commercial simulator spaces, and premium indoor golf builds.
A Curved Golf Enclosure Kit is a strong choice for golfers who want their simulator space to feel more complete, more polished, and more visually impressive. The curved layout helps surround the hitting area, gives the simulator room a high-end look, and works well for players who want a cleaner presentation for practice, simulator play, lessons, or customer use.
The screen surface curves from the center out toward both side panels instead of meeting them at a right angle. That curve helps remove the hard visual edge where a flat screen ends and the side fabric begins. When looking at the projected image, the visual field feels more continuous, which can make the simulator room feel more immersive during play.
This Curved Golf Enclosure Kit also works well for customers who are building a more permanent indoor golf space. Because the curved screen extends forward at the sides, the setup can create a wide visual feel while helping the room look cleaner and more intentional. That can be helpful in premium simulator rooms where appearance, layout, and screen presentation matter.
This is Carl’s Place’s top enclosure tier. It pairs well with overhead launch monitors, ceiling-mounted systems, premium impact screens, and optional 4K projectors for customers who prioritize image quality and room presentation. When combined with the right launch monitor, projector, hitting mat, turf, and simulator computer, the Curved Golf Enclosure Kit helps create a polished, immersive simulator space with a clean, finished appearance from the front and sides.
For golfers who want a premium indoor simulator layout, the Curved Golf Enclosure Kit gives the hitting area a more polished look while helping the room feel organized, intentional, and easier to use.
⚠️ Confirm the selected enclosure’s exact outer dimensions before ordering. Allow at least 6 inches above the frame and 2–3 inches on each side for assembly clearance. Your room must also provide enough clearance for the golfer’s height, swing, and longest club.
At a Glance
What's Included
- Premium Golf Impact Screen — your choice of White Premium or High-Contrast Gray
- Blackstop™ fabric surround
- Steel fittings and elbows for all frame joints and corners
- Foam inserts to help protect the frame from shanked shots
- Ball bungees and zip ties for securing and adjusting screen tension
- ⚠️ Pipe framing is not included with the base enclosure. A compatible Carl’s Place Pipe Framing Kit is available separately, or the required 2-inch EMT pipe may be sourced locally and cut to the dimensions specified for your enclosure size.
- ⚠️ Back Cover Kit, Back Cover Pipe Kit, and Safety Baffles are separate optional add-ons and are not included with the base enclosure. Hitting mat, launch monitor, projector, and computer are also sold separately — see “Add-Ons” below.
Size Options
| Enclosure | Height × Width × Depth | Notes |
|---|---|---|
| 9×14×8 | 9 ft tall, 14 ft wide, 8 ft deep | Shortest depth shown in this table; verify room dimensions and swing clearance. |
| 9×15×10 | 9 ft tall, 15 ft wide, 10 ft deep | Adds screen width compared with the 9×14 configuration. |
| 9.5×14.5×10 | 9.5 ft tall, 14.5 ft wide, 10 ft deep | Taller configuration with a 14.5-foot nominal width. |
| 9.5×16×10 | 9.5 ft tall, 16 ft wide, 10 ft deep | Wider configuration at the same height and depth as the row above. |
| 10×15×10 | 10 ft tall, 15 ft wide, 10 ft deep | Requires room height beyond the enclosure’s outer frame height for assembly clearance. |
| 10×17×10 | 10 ft tall, 17 ft wide, 10 ft deep | Widest configuration shown in this table; depth remains 10 feet. |
⚠️ Each size is available with 8-, 10-, or 15-foot depth options. Custom sizes may also be available; contact us at portersgolf@gmail.com to discuss your room requirements.
DIY vs Pro vs Curved — Which One
| Enclosure | Price Range | Best For | Screen Shape |
| DIY | $1,000–$1,875 | Entry builds, flexible spaces, smaller rooms | Flat |
| Pro | $3,410–$5,610 | Dedicated sim rooms, extended depth, permanent install | Flat |
| Curved | $4,895–$6,630 | Premium immersive builds, wider visual field, and optional 4K projection | Curved arc |
Looking for a full simulator setup? Compare this enclosure with our complete golf simulator packages.
Add-Ons
- Carl’s HotShot Hitting Mat
- Carl’s HotShot Mat Base
- Golf Simulator Projector
- Launch Monitor
- Back Cover Kit
- Back Cover Pipe Kit
- Safety Baffle
- Computer
⚠️ Not sure which curved size fits your room? Email portersgolf@gmail.com with your room dimensions — we’ll confirm before you order.
For official golf rules and playing guidance, visit the USGA Rules of Golf resource page.
Price: $4,894.95 – $6,629.95
| Weight | 200 lbs |
|---|
Only logged in customers who have purchased this product may leave a review.
Returns & Policy
Return eligibility and return periods vary by product. Most eligible products have a 15-calendar-day return window after delivery unless product-specific terms state otherwise. Most eligible Carl’s Place products have a 30-calendar-day return window after delivery. For mixed-brand simulator packages, the applicable terms vary by component. All returns require prior authorization and a Return Merchandise Authorization (RMA).
Buyer-initiated return shipping is generally the customer’s responsibility. Returned items must meet the applicable condition and packaging requirements. Carl’s Place enclosure kits must be returned complete with all components; partial-kit returns are not accepted. Restocking fees, custom-product restrictions, and freight-return charges may apply. Please review our full Refunds, Returns & Cancellations Policy for complete product-specific details.
View Full Refunds, Returns & Cancellations Policy »Related products
Reviews
Clear filtersThere are no reviews yet.